Install, Troubleshooting User guide

Table of Contents

Table 2.1 – Power Ratings .............................................................................. 2-2

Table 2.2 – Available Kits and Options ........................................................... 2-13

Table 3.1 – Ambient Conditions ...................................................................... 3-2

Table 3.2 – Drive Dimensions and Weights .................................................... 3-2

Table 3.3 – Recommended Power Wire Sizes for 1 to 5 HP Drives ............... 3-4

Table 3.4 – Recommended Power Wire Sizes for 7.5 and 10 HP Drives ....... 3-5

Table 3.5 – Recommended Power Wire Sizes for 15 and 20 HP Drives ........ 3-5

Table 3.6 – Recommended Terminal Strip Wire Sizes ................................... 3-5

Table 3.7 – Motor Lead Lengths ...................................................................... 3-6

Table 3.8 – Reactors ....................................................................................... 3-6

Table 3.9 – AC Input Line Fuse Selection Values ........................................... 3-8

Table 5.1 – AC Line Reactors ......................................................................... 5-2

Table 7.1 – RS-232 Connections (Terminals 1-3) ........................................... 7-1

Table 7.2 – Encoder Connections (Terminals 4-9).......................................... 7-1

Table 7.3 – Analog Output Connections (Terminals 10 and 11) ..................... 7-2

Table 7.4 – Analog Speed/Torque Reference Connections

(Terminals 12-15) ......................................................................... 7-2

Table 7.5 – Digital Input Connections (Terminals 16-25) ................................ 7-2

Table 7.6 – Snubber Resistor Braking Connections (Terminals 26 and 27) ... 7-3

Table 7.7 – Status Relay Connections (Terminals 28-31) .............................. 7-3

Table 7.8 – Wiring Signal and Control I/O to the Terminal Strip ..................... 7-9

Table 9.1 – Resistance Checks ....................................................................... 9-3

Table 9.2 – Replacement Parts for 1-5 HP Drives .......................................... 9-4

Table 9.3 – Replacement Parts for 7.5-10 HP Drives ..................................... 9-4

Table 9.4 – Replacement Parts for 15-20 HP Drives ...................................... 9-5

Table A.1 – Service Conditions ........................................................................ A-1

Table A.2 – Environmental Condition .............................................................. A-2

Table A.3 – Terminal Strip Input Specifications ............................................... A-2

Table A.4 – Terminal Strip Output Specifications ............................................ A-2

Table A.5 – Terminal Strip RS-232 Specifications........................................... A-3

Table A.6 – Encoder Feedback Device Specifications

(FVC Regulation Only) ................................................................. A-3

Table A.7 – Input Signal Response Times (Maximum) ................................... A-4

List of Tables