Software Start-Up and Ref. Owner manual

4-4
GV3000/SE 230 VAC Drive, Software Reference Version 6.04
Step 3. Once the desired menu is displayed, press the ENTER key to select it.
The first parameter number in the menu or
the last parameter number previously
accessed from that menu will be displayed.
Step 4. Press the £ key or the ¥ key to move through the parameters.
Each parameter number will be displayed as
you move through the parameters.
Step 5. Once the desired parameter is displayed, press the ENTER key to access
it.
The parameter value will be displayed.
Step 6. Press the £ key or the ¥ key to change the value.
Note that if programming is disabled in
parameter P.051 (Programming Disable), or
if the parameter is configurable and the drive
is running, the value will not change.
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
AUTO
MAN
Forward
Reverse
PROGRAM
RUN
JOG
STOP
RESET
START
ENTER
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM