Software Start-Up and Ref. Owner manual

B-4
GV3000/SE 230 VAC Drive, Software Reference Version 6.04
Parameter No.
Setting Date
Second
Menu
Vector
U.000
U.001
U.002
U.003
U.004
U.005
U.006
U.007
U.008
U.009
U.012
U.013
U.014
U.015
U.016
U.017
U.018
U.019
U.020
U.021
U.022
U.023
U.024
U.025
U.026
U.027
U.028
U.030
U.031
U.032
U.040
U.041
U.042
U.043
U.044
U.045
U.046
U.047
U.048
Parameter Name
Torque Reference Source
Encoder PPR
Motor Poles
Motor Nameplate Base Frequency
Motor Nameplate Amps
Motor Nameplate RPM
Magnetizing Current
Motor Nameplate Volts
Torque Self-Tune Enable
Torque Self-Tune Result
Speed Regulator Proportional Gain
Speed Regulator Integral Gain
Torque Regulator Proportional Gain
Torque Regulator Integral Gain
Field Weakening Start RPM
Motor Top Speed
AC Line Volts
Flux Current Regulator Proportional Gain
Flux Current Regulator Integral Gain
Rotor Time Constant
Motor Nameplate Horsepower
Low DC Bus Fault Avoidance Enable
High DC Bus Fault Avoidance Enable
Zero Speed Hold Time
Current Compounding Gain
Inertia Compensation Gain
Losses Compensation Gain
SVC Slip Adjust
SVC Sync Direction
SVC Flux Current Regulator Gain
Outer Control Loop Feedback Source
Outer Control Loop Lead/Lag Select
Outer Control Loop Lead/Lag Low Frequency
Outer Control Loop Lead/Lag Ratio
Outer Control Loop Reference Gain
Outer Control Loop Proportional Gain
Outer Control Loop Integral Gain
Outer Control Loop Trim Range Percentage
Outer Control Loop Proportional Trim Enable