Reference Manual Owner's manual

Publication GMLC-5.2 - November 1999
Fault Handling 803
Fault Handling
Refer to the FAULT.GML file on the installation disk for examples of
fault routines.
Interrupts
The Interrupt SLC instruction block allows the 1394 to initiate a ladder
interrupt routine in the SLC. You can use this command as an action in an
Input Event Action statement, or include it directly in the GML
Commander program.
SLC inputs have also been added to the Input Event Action block, which
means you now can generate an event (interrupt) using SLC inputs.
Refer to the Input section of the Function Blocks chapter of this manual,
and your SLC 500 Reference manual (publication 1747-6.15) for more
information.
Programmable Limit Switch Example
The purpose of this example is to show how to transfer a floating point
variable to the SLC using an SLC input file.