User Manual

WebPak 3000 Drives: Register Map

7-17

35 AutoMax Indirect Register 4 Value to be written to the parameter selected in the

corresponding Drop 2 register

36 AutoMax Indirect Register 5 Value to be written to the parameter selected in the

corresponding Drop 2 register

37 AutoMax Indirect Register 6 Value to be written to the parameter selected in the

corresponding Drop 2 register

38 AutoMax Indirect Register 7 Value to be written to the parameter selected in the

corresponding Drop 2 register

39 AutoMax Indirect Register 8 Value to be written to the parameter selected in the

corresponding Drop 2 register

40 AutoMax Indirect Register 9 Value to be written to the parameter selected in the

corresponding Drop 2 register

41 AutoMax Indirect Register 10 Value to be written to the parameter selected in the

corresponding Drop 2 register

42 AutoMax Indirect Register 11 Value to be written to the parameter selected in the

corresponding Drop 2 register

43 AutoMax Indirect Register 12 Value to be written to the parameter selected in the

corresponding Drop 2 register

44 AutoMax Indirect Register 13 Value to be written to the parameter selected in the

corresponding Drop 2 register

45 AutoMax Indirect Register 14 Value to be written to the parameter selected in the

corresponding Drop 2 register

46 AutoMax Indirect Register 15 Value to be written to the parameter selected in the

corresponding Drop 2 register

47 AutoMax Indirect Register 16 Value to be written to the parameter selected in the

corresponding Drop 2 register

48 AutoMax Indirect Register 17 Value to be written to the parameter selected in the

corresponding Drop 2 register

49 AutoMax Indirect Register 18 Value to be written to the parameter selected in the

corresponding Drop 2 register

50 AutoMax Indirect Register 19 Value to be written to the parameter selected in the

corresponding Drop 2 register

Table 7.12 – WebPak 3000 Register Map, Drop_3: Master Write Registers, FULL Connection. Tunable/Configurable Data (Drive Input Data) (Continued)

Configurable data are read by the regulator approximately every 600 msec when Tune/Config Input Enable bit=1 and the drive is not running or jogging.