User Manual

ManualsBrandsRockwell Automation ManualsEquipmentFlexPak/WebPak 3000 DC Drive AutoMax Network Communication Board

7-14

AutoMax Network Communication Option Board

48 AutoMax Indirect Parameter 17 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 48 in Drop 3

49 AutoMax Indirect Parameter 18 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 49 in Drop 3

50 AutoMax Indirect Parameter 19 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 50 in Drop 3

51 AutoMax Indirect Parameter 20 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 51 in Drop 3

52 AutoMax Indirect Parameter 21 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 52 in Drop 3

53 AutoMax Indirect Parameter 22 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 53 in Drop 3

54 AutoMax Indirect Parameter 23 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 54 in Drop 3

55 AutoMax Indirect Parameter 24 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 55 in Drop 3

56 AutoMax Indirect Parameter 25 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 56 in Drop 3

57 AutoMax Indirect Parameter 26 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 57 in Drop 3

58 AutoMax Indirect Parameter 27 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 58 in Drop 3

59 AutoMax Indirect Parameter 28 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 59 in Drop 3

60 AutoMax Indirect Parameter 29 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 60 in Drop 3

61 AutoMax Indirect Parameter 30 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 61 in Drop 3

62 AutoMax Indirect Parameter 31 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 62 in Drop 3

63 AutoMax Indirect Parameter 32 Selects parameter to which the value in the

corresponding Drop 3 register is written

Value of 0 disables register 63 in Drop 3

Table 7.10 – WebPak 3000 Register Map, Drop_2: Master Write Registers, FULL Connection. Tunable Data (Drive Input Data) (Continued)

Tunable data are updated by the regulator approximately every 600 msec when Tune/Config Input Enable bit = 1.