Owner manual

Install and Wire the Drive 2-19
Important: The tightening torque in the table applies to the wiring device (stud or
terminal board) provided. When an input or an output device (breaker or
lug kit) is added, refer to the kit instructions for tightening specifications.
Table 2.3 – AC Line Torque Recommendations
AC Input
Horsepower 230 VAC 460 VAC
1.5 55 lb-in (6.2 Nm) ----------
2 55 lb-in (6.2 Nm) ----------
3 55 lb-in (6.2 Nm) 55 lb-in (6.2 Nm)
5 55 lb-in (6.2 Nm) 55 lb-in (6.2 Nm)
7.5 55 lb-in (6.2 Nm) 55 lb-in (6.2 Nm)
10 55 lb-in (6.2 Nm) 55 lb-in (6.2 Nm)
15 120 lb-in (13.6 Nm) 55 lb-in (6.2 Nm)
20 120 lb-in (13.6 Nm) 55 lb-in (6.2 Nm)
25 120 lb-in (13.6 Nm) 55 lb-in (6.2 Nm)
30 120 lb-in (13.6 Nm) 120 lb-in (13.6 Nm)
40 200 lb-in (22 Nm) 120 lb-in (13.6 Nm)
50 200 lb-in (22 Nm) 120 lb-in (13.6 Nm)
60 200 lb-in (22 Nm) 120 lb-in (13.6 Nm)
75 200 lb-in (22 Nm) 200 lb-in (22 Nm)
100 200 lb-in (22 Nm) 200 lb-in (22 Nm)
125 350 lb-in (40 Nm) 200 lb-in (22 Nm)
150 350 lb-in (40 Nm) 200 lb-in (22 Nm)
200 ---------- 200 lb-in (22 Nm)
250 ---------- 350 lb-in (40 Nm)
300 ---------- 350 lb-in (40 Nm)
400 ---------- 350 lb-in (40 Nm)
500 ---------- 350 lb-in (40 Nm)
600 ---------- 350 lb-in (40 Nm)
Rated Output Amps AC Input
7A 55 lb-in (6.2 Nm)
29A 55 lb-in (6.2 Nm)
55A 120 lb-in (13.6 Nm)
110A 120 lb-in (13.6 Nm)
265A 200 lb-in (22 Nm)