Owner manual

Install and Wire the Drive

2-17

2.5.2 Recommended Lugs

The following describes how to interpret lug model numbers used in grounding the

drive. Refer to table 2.2 for a list of recommended lug model and part numbers.

Table 2.2 – Recommended Lug Model and Part Numbers

Lugs are non-insulated screw type (solderless) for use with solid and stranded wire.

Model

Number

Reliance Part

Number Wire Size

Mounting

Hole Material

1LG1101 68321-38AA 14 - 8 AWG M5 Copper

1LG1102 68321-38AB 14 - 8 AWG M6 Copper

1LG1103 68321-38AC 4 - 1/0 AWG M10 Copper

1LG1104 68321-38AD 1/0 - 4/0 AWG M12 Copper

1LG1105 68321-38AE 4/0 - 500 MCM M10 Copper

1LG1201 68321-38BA 14 - 1/0 AWG M6 Aluminum

1LG1202 68321-38BB 14 - 2/0 AWG M6 Aluminum

1LG1203 68321-38BC 6 - 250 MCM M8 Aluminum

1LG1204 68321-38BD 6 - 300 MCM M6 Aluminum

1LG1205 68321-38BE 6 - 350 MCM M10 Aluminum

1LG1206 68321-38BF 4 - 500 MCM M10 Aluminum

1LG1207 68321-38BG 300 - 800 MCM M12 Aluminum

1LG1208 68321-38BH 500 - 1000 MCM M12 Aluminum

1LG2401 68321-39BA 2 - 600 MCM M10 Aluminum

1LG2402 68321-39BB 350 - 800 MCM M10 Aluminum

1LG2403 68321-39BC 500 - 1000 MCM M12 Aluminum

1LG3601 68321-40BA 2 - 600 MCM M12 Aluminum

1LG 1 2 03

Basic Catalog Number

Number of Conductors

1 = One conductor

2 = Two conductors

3 = Three conductors

Mounting Hole and Lug Material

1 = One mounting hole, copper

2 = One mounting hole, aluminum

3 = Two mounting holes, copper

4 = Two mounting holes, aluminum

5 = Four mopunting holes, copper

6 = four mounting holes. aluminum

Lug Version Number

01 throu

h 99