Instructions

2
Lifting Instructions for FlexPak 3000 and WebPak 3000 DC Drives
Step 5. Tighten all bolts as follows:
Figure 1 – Mounting Bolt Engagement
Figure 2 – 1.5 HP to 30 HP @ 230 VAC / 3 HP to 60 HP @ 460 VAC Drive Mounting Hole Pattern
Horsepower Fasteners Torque
3 HP to 60 HP @ 460 VAC (1.5 HP to 30 HP @ 230 VAC) M6 or 1/4 in 3.7 Nm (33 lb-in)
75 HP to 150 HP @ 460 VAC (40 HP to 75 HP @ 230 VAC) M8 or 5/16 in 11.3 Nm (100 lb-in)
200 HP to 600 HP @ 460 VAC (100 HP to 150 HP @ 230 VAC) M10 or 3/8 in 23 Nm (200 lb-in)
3/4” maximum engagement
One full thread engagement
beyond panel required
463.0mm[18.23"]
477.3mm[18.79"]
7.9mm[0.31"]
22.4mm[0.88"]
224.9mm[8.86"]
270.5mm[10.65"]
112.4mm[4.43"]