Hardware Owner's manual

toi-ii
Table of Illustrations
Publication S-3062 – November 1997
Figure 3.9
Installing a Sheet Metal Joiner on an Overhead Cable
Routing Box (FD86N to SA3000 or SB3000)
. . . . . . . . . .
3-7
Figure 3.10
Installing DC Bus Bar Connections from the
FD86N Enclosure to an MCC
. . . . . . . . . . . . . . . . . . . . . .
3-8
Figure 3.11
Installing the DC Bus Bar Adapter Connections between an
SA3000 or SB3000 and a DC Bus Bar Assembly
on the FD86N Enclosure
. . . . . . . . . . . . . . . . . . . . . . . . .
3-9
Figure 3.12
FD86N Enclosure to FD86N Enclosure Ground Cable
Location and Hardware Orientation
. . . . . . . . . . . . . . . .
3-10
Figure 3.13
Connecting Incoming Ground Bus Bar Assembly Cables
to the FD86N Enclosure
. . . . . . . . . . . . . . . . . . . . . . . . .
3-11
Figure 3.14
Grounding Hardware Connections
. . . . . . . . . . . . . . . . .
3-12