Energy Saving Package Instruction Manual

C-6 FanMaster Screens and Field Descriptions
Allen-Bradley® FanMaster™ Energy Saving Package Installation Manual - Publication FANM-IN001B-EN-P – December, 2009 PN-65329
Setup Screen #2
The second Setup screen is used to enter data required to configure the
FanMaster for your installation. This screen is different for evaluation unit
versus units installed with a drive. This configuration is completed at the
factory.
Table C.E Setup Screen #2 Fields
Field Name Description
Drive Type Type of drive installed. Choose the drive installed using the up or down and
Enter arrow buttons. (No selections are available for evaluation units.)
Heating Prop Proportional (Heating Prop) or two-state (Heating 2-State) heating system
selection.
Cooling Prop Proportional (Cooling Prop) or two-state (Cooling 2-State) cooling system
selection.
Pressure FanMaster uses an optional pressure sensor (Pressure) or does not use
an optional pressure sensor (No Pressure) selection.
Demand Vent / Constant
Vent / Variable Vent
Demand ventilation (Demand Vent.), constant ventilation (Constant Vent.),
or Variable ventilation (no CO
2
) (Variable Vent.) mode selection.
Permanent Install Only
Evaluation Unit Install Only