User Guide Instruction Manual

●
●
●
●
●
FactoryTalk Historian ProcessBook User Guide
162
Additional Dynamic Symbols
Values
A value is the reading obtained at the specified end time for a data stream.
It is shown as a number or a digital state string. The tag name and time
stamp may also be shown. The time stamp is the time stamp from the
FactoryTalk Historian system that matches the event value shown.
Add a Dynamic Value
To add a dynamic value:
1. In Build mode, open a display.
2. On the Drawing toolbar, click or click Draw > Value. The mouse
pointer changes to the Value pointer.
3. Click in the display where you want the value to be placed.