Configuration Guide Owner's manual

Chapter 5 Configuring FactoryTalk Historian
86 Rockwell Automation Publication HSE-IN025A-EN-E–September 2013
<GeneralLicensePool> = ∑ <PTY3 licenses> +
<BaseLicenseCount> + ∑ <FHSE3ADD licenses>
<GeneralLicensePool> = 500 + 2400 + 2000
<GeneralLicensePool> = 4900
In this example, the total of 19500 licenses has been distributed in
the following way:
Licenses and license pools Values
License total 19500
Rockwell license pool 14600
General license pool 4900
TIP
The symbols used in the formulas presented below, mean the following:
∑ "the sum of"
Min "the lower value of the two in the brackets"
Max "the greater value of the two in the brackets"
In the following example we will calculate how licenses will be
distributed between the General and Rockwell license pools without
FHSE3ADD license activations.
We will use the following values:
Activation Value ∑ (sum)
FHSE.2K 2000 12000
FHSE.10K 10000
FHSE3ADD.2K 0 0
FHLD.5K 5000 5000
PTY3.500 500 500
Total
17500
Distributing Licenses
without FHSE3ADD
Activation