User Guide User Manual

Startup Command File
62
Opt Cont Tab
Source Host reconnection delay.
This parameter sets the time delay for attempting to reconnect to source Historian Server after
a disruption. The number is entered in seconds and converted to milliseconds before being
saved in the batch file. This number must be between 1 second and 8 hours. (/DELAYS=x,
default: 0 seconds)
Receiving Host reconnection delay.
This parameter set the time delay for attempting to reconnect to receiving Historian Server
after a disruption. The number is entered in seconds and converted to milliseconds before
being saved in the batch file. This number must be between 1 second and 8 hours.
(/DELAYR= x, default: 0 seconds)
Suppress writing I/O Timeout to tags upon reestablishment of a lost
connection to the source Historian Server
When setting Location3 to write “I/O Timeout” for any tags, use this parameter to suppress
the I/O Timeout state written to these tags upon reestablishment of a lost connection to the
source Historian Server. If this parameter is not set, the state written at reconnection will
prevent history from being recovered for the period of the disconnection. (/TS)