User Guide User Manual

FactoryTalk Historian To Historian Interface User Guide 59
Location Tab
Use the Override Tag Location Code Settings check boxes to configure the interface to ignore
individual tag location codes and to apply specific settings for each of the location codes.
Override Location 1
Ignore Location1 for each tag and load all tags configured for the specified point source
regardless of Location1 and interface ID values. (/C1)
Override Location 2
Ignore Location2 for each tag and set Location2 value to be this number for all interface
tags. (/C2=x)
Override Location 3
Ignore Location3 for each tag and set Location3 value to be this number for all interface
tags. (/C3=x)
Override Location 4
Ignore Location4 for each tag. The value used here should be 1, to have all points for the
interface sign up for exceptions, or 2, to have all points retrieve history only. (/C4=x)
Override Location 5
Ignore Location5 for each tag and set all points for the interface to the same value of this
parameter (i.e., 0, 1, 2, or 3). (/C5=x)