User Guide User Manual

FactoryTalk Historian To Historian Interface User Guide 55
PI2 Security File – Use PI2 security file
The PI2 Security File section is used only if the source host is a PI2 server. If a security file is
to be used, select the Use PI2 security file check box.
PI2 Security File - Unique Part
The Unique part is the name suffix of tag security file on a Historian 2 system. The full name
on the Historian 2 system is PItoPI<name>.SEC, where <name> is the portion specified in
the Unique part box. (/SF=uniquename).
PI2 Security File - User
The User is the login user name of a PI user on Historian 2 node that the interface is to use.
This is used for Historian 2 source systems. (/LN=username).
PI2 security File - Password
The Password is the login password of the PI user specified in the User box on Historian 2
node. This is used for Historian 2 source systems. (/PW=password).
Additional Parameters
This section is provided for any additional parameters that the current ICU Control does not
support.