Quick Start Instruction Manual

FactoryTalk Alarms and Events System Configuration Guide
28
• • • • •
4. In the New Tag dialog box, type a name for the digital alarm tag, and then click
OK.
In our example, we named the tag
DigitalAlarm1.
Step 4: Specify a tag for each of the digital alarm’s operands,
or just enter
0
1. Inside the alarm instruction, select the ProgAck operand.
2. On the File menu, click New Component, and then click Tag.
3. In the New Tag dialog box, type a name for the tag, select BOOL as the data type,
and then click OK.
In our example, we named the tag
DigitalAlarm1_Ack. For details about using the
New Tag dialog box, click Help.