t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 87
Energy Data Collector Configuration Chapter 3
2. Add the MOV instruction to
your rung by clicking the Move/
Logical tab in the Instruction
toolbar, then clicking the MOV
instruction icon.
3. Choose the source tag, Val_Total_xxx, from your energy
Add-On Instruction.
For this example, Boiler_House_Gas.Val_Total_Gas is
selected.
4. Enter a name for the new controller-scoped destination
tag in the format: ControllerName_EnergyTotals.
For this example, enter L2x_EnergyTotals.
5. Right-click the destination tag just entered and choose
New ‘TagName’ to create the controller tag.
6. Configure the new tag.
a. Choose Real for the Data Type with
an array size at least equal to the
number of controller total energy tags
to be mapped.
b. Choose Float for the Style.
c. Click OK to save the configuration.