t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 81
Energy Data Collector Configuration Chapter 3
2. Click the Add-On tab in the instruction toolbar.
3. Click an Energy Add-On Instruction icon to add
the instruction to your rung.
For this example, the Energy_Gas_Digital Add-On
Instruction is selected.
4. Click in the energy tag name field and enter a
tag name.
For this example, Boiler_House_Gas is
entered.
5. Right-click the energy tag name just entered
and choose the New Ta g _N a me” from the list.
6. Click OK to accept the default setup for the new
Add-On Instruction tag.