t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 71
Energy Data Collector Configuration Chapter 3
These are the Demand configuration parameters.
3. To change a parameter:
a. Press Enter to select a menu item.
b. Press the Up and Down arrows to change the value.
c. When the desired value is displayed, press Enter to confirm your selection.
4. Press Esc to return to the main menu.
Configure the Date and Time
Follow these steps to configure the date and time for the PowerMonitor 500 device.
1. From the main programming menu, use the Up and Down Arrows to scroll through the programming menu.
2. Select the Clock menu item by pressing Enter.
These are the Clock configuration parameters.
3. To change a parameter:
a. Press Enter to select a menu item.
b. Press the Up and Down arrows to change the value.
c. When the desired value is displayed, press Enter to confirm your selection.
d. Press Esc to return to the main menu.
Parameter
(1)
(1) Additional advanced parameters, such as alarms, outputs, and digital
filtering are also available for configuration. Refer to the PowerMonitor 500
Unit User Manual, publication 1420-UM001
, for detailed information.
Range Default
Type FIXED
AVG/DMD
SLIDE
FIXED
Time 01, 05, 10, 15, 20, 30 15
Sync OFF/CLOCK OFF
Parameter Range Default
FORMAT EU/USA EU
YEAR 2009…2099 2009
MONTH 1…12 1
DAY 1…31 1
HOUR 0…23 0
MINUTE 0…59 0
SECOND 0…59 0