t Owner manual

66 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 3 Energy Data Collector Configuration
Configure the Date and Time
Follow these steps to configure the date and time for the PowerMonitor 1000 device. The Date and Time Setup Parameters
table on page 66
shows the date and time parameters, and example settings
1. Choose Configure Options>Date and
Time to access the Date and Time
Configuration page.
2. Enter the default password of 0 or another valid
password to access Edit mode.
3. Configure the date and time parameters accordingly.
4. Click Submit to send the parameter changes to the
PowerMonitor 1000 device.
TIP
The password appears as asterisks (*).
If you don’t know the password, call
Rockwell Automation technical
support for assistance.
Date and Time Setup Parameters
Parameter Range Default Example Settings
Password 0…9999 0 0
Date: Year 2001…2100 2005
Date:Month 1…12 1
Date:Day 1…31 0
Time:Hour 0…23 0
Time:Minute 0…59 0
Time:Seconds 0…59 0
Time:Hundreths 0…59 0