t Owner manual

56 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 3 Energy Data Collector Configuration
Follow These Steps
Follow these paths to configure the PowerMonitor devices and Compactlogix controllers in your energy system.
Create a Project and Set Up
Controller Properties
Configure a CompactLogix
Controller
Configure CompactLogix
Energy Inputs
Map Energy Add-On Instruction
Tags to PLC-5 Addresses
page 86
Import Energy Add-On
Instructions
page 78
page 79
page 80
Configure the Ethernet IP
Address
Configure a PowerMonitor 3000
Device
Configure Advanced Device
Parameters
Configure Basic Device
Parameters
page 58
page 59
page 60
Configure the Ethernet IP
Address
Configure a PowerMonitor 1000
Device
Configure Advanced Device
Parameters
Configure the Date and Time
page 66
Configure Analog Inputs
page 62
page 63
page 65
Configure with the Display
Configure a PowerMonitor 500
Device
Configure Communication
Parameters
Configure Basic Device
Parameters
page 70
Access the Programming
Menu
page
68
page 69
page 69
RS-232 Data Port Use and
Configuration
Configure a PowerMonitor
Wireless 250 Device
PC Receiver RS-485 Data Port
Use and Configuration
page
67
page 67
Setup Using the Web Interface
Configure a PowerMonitor 5000
Device
Basic Metering Setup
Native Ethernet Communication
Setup
page 74
Obtaining Access to the
Configuration Pages
page
72
page 72
page 74
Configure Advanced Parameters
Configure the Date and Time
page 70
page 71
Set Up Date and Time
Test Security
Setting Up Remaining Functions
of the PowerMonitor 5000 Unit
page 77
Set-up Initial Security
page
76
page 76
page 77