t Owner manual

372 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 12 Demand Control
Configure Communication
Follow these steps to configure communication.
1. Double-click Communication Setup under RSLinx Enterprise in the Explorer
window.
You will see this dialog box if a communication setup does not exist.
2. Select Create a new configuration and click Finish.
3. Click Add under Device Shortcuts to create a new shortcut, then
rename the shortcut DMD.
4. Click the Design Local tab.
5. Expand the Ethernet network and select the controller containing the
DMD program.
6. Verify that the shortcut name is highlighted, then
click Apply.
7. Click Yes to apply the changes when prompted.
8. Click Copy from Design to Runtime to copy
changes to the runtime communication setup.
9. Click Yes when prompted to continue with the copy operation.