t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 357
FactoryTalk View ME Energy Faceplates Chapter 11
Run Application on PanelView Plus Terminal
The (.mer) runtime file is now stored in the PanelView Plus terminal so you are ready to run the application on the
terminal.
1. Apply power to the PanelView Plus terminal.
The FactoryTalk View ME Station window opens.
2. Press F1, Load Application.
You can skip this step if you checked Run
application at start-up when creating the
runtime application.
The Load Application window opens.
3. Press the up and down arrows to scroll
through the list and select the application
you want to load and run.
4. Press Load [F2] to load the application.
5. Press Yes [F7].
If you press No, the communication
settings from the previously run project
will be used.
PM1K_FP