t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 343
FactoryTalk View ME Energy Faceplates Chapter 11
2. Right-click in the display and choose
Object Explorer.
3. Browse to Row_Group_x and double-click
the GotoDisplayButton_x that you want to configure.
For this example, GotoDisplayButton_5 is selected to configure
the Boiler_House meter button in row 5 of the faceplate.
4. Click the Label tab and type the text you want to display on the
corresponding Goto Display button.
For this example, Boiler House Electric is entered.
TIP
Complete steps 5 and 6 only if you are configuring the button to also launch a faceplate. Otherwise, skip to step 7.