t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 333
FactoryTalk View ME Energy Faceplates Chapter 11
3. Choose the corresponding energy tag,
MeterName.Sts_xxx_Input_Fault, for the Dest
tag.
For this example,
Boiler_House_Gas.Sts_Digital_Input_Fault tag
is chosen.
4. Repeat steps 2 and 3 for each of your
CompactLogix energy digital and analog inputs
that were configured on page 80
.
For the Efficient Industries Plant 1 example, the
fault logic would look similar to this.
Configure Alarm Logic for Alarm History Faceplate
The Alarm History Faceplate can display date and time-stamped alarm, and fault information for each energy meter on a
PanelView Plus terminal. The Alarm History Faceplate works in conjunction with energy and faceplate Add-On
Instructions.
TIP
The procedure in this section is optional and necessary only if you intend to use the Alarm History Faceplate.