t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 293
FactoryTalk View ME Energy Faceplates Chapter 11
3. Select ‘New Module’.
4. Expand the Drives folder and select the appropriate SMC-50-E controller and click OK.
5. Enter a distinct module name and the IP Address of your module.
(For example, we use ‘Motor_1’ for the module name throughout this document.)
6. Click Change to launch the Module Definition window.
IMPORTANT
The IP address must match with that of your 20-COMM-E module. This step assumes you already assigned an IP address to your
20-COMM-E module. Refer to the PowerFlex 20-COMM-E EtherNet/IP Adapter User Manual, publication 20COMM-UM010
, for
information on how to assign it an IP address.