t Owner manual

266 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
The Communication Auxiliary module can be configured by using an internal web page.
1. Type the IP Address of your 193-DNENCAT module into the URL window in an internet browser.
2. Select Scan List Configuration to configure the scan list to allow for E3 Plus communication.
3. When prompted, use ‘Administrator’ as the User name, leave the password blank, and click OK.
4. Select the E3 Plus for your application and click Save.