t Owner manual

172 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 8 FactoryTalk EnergyMetrix Software Alarm Setup
View Active Alarms and Alarm Log
You can view active alarms and the alarm log by selecting System Status on the System tab, then selecting either the Active
Alarms tab or the Alarm Log tab.
On activation, an alarm displays on the Active Alarms and Alarm Log tab. When the alarm clears, it is removed from Active
Alarms but remains in the Alarm Log until purged.
The Alarm Log tab lists the alarm history. You can view or purge individual alarms by clicking the appropriate link. You can
view Device communication errors by selecting the Device Comm. Errors tab.