t Owner manual

156 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 7 FactoryTalk EnergyMetrix Software Meter and Tag Setup
4. Select a meter from the Meters Not
Assigned to Group that you want to move
to the target group or domain, then click
the right arrow.
You should see the meter in the Meters
Assigned to Group.
5. Click Save.
6. Select the initial group to which the meter
was assigned.
For this example, Initial Meter Group is
selected.
7. Click Edit.
TIP
You cannot unassign a meter from a group if it is the only group to which the meter is assigned.