t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 129

FactoryTalk EnergyMetrix Software Device Setup Chapter 6

Change the name and communication path to each device as shown in the table. Note that all devices fall under the

Electricity parent group except for the MCC 2 device that is under Fuels. For reference, see the Efficient Industries

Plant 1 example on page 108.

You should see six PowerMonitor

1000 devices and one

PowerMonitor 3000 device under

the appropriate groups.

Parent Group Name Communication Path

Electricity Production 1 AB_ETH-1\10.10.10.3

Electricity Production 2 AB_ETH-1\10.10.10.4

Electricity Shipping/Receiving/DC AB_ETH-1\10.10.10.5

Fuels MCC 2 AB_ETH-1\10.10.10.6

This is the PowerMonitor 3000

PM 1000