t Owner manual

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 127
FactoryTalk EnergyMetrix Software Device Setup Chapter 6
11. Click Save.
You should see the Boiler House device under
Electricity.
12. If the device is connected to the network, click Test
Connection to verify communication with the device.
If you see connection failed, try again. If the test times
out, check that you entered the correct communication path in step 9
and that the device is on line. Try to access the
PowerMonitor's web page or try to ping it from the FactoryTalk EnergyMetrix server.