Manual

1-2 DeviceNet Communications Module
• User-defined fault actions that determine how the module and
MD65 drive respond to communication disruptions on the network
and controllers in idle mode.
• Faulted node recovery is supported. You can configure a device
even when it is faulted on the network if you have a configuration
tool that uses faulted node recovery and have properly set
module node address switches and data rate switches.
1.2 Related Documentation
Refer to the following related publications as necessary for more
information. All of the publications are available from
http://www.theautomationbookstore.com.
• D2-3519 MD65 AC Drive User Manual
• D2-3488 VS Utilities Getting Results Manual
Online help installed with the software
• RA-IN003A-EN-P RJ45 Splitter Cable For Use With DSI/MDI
Products
• D2-3523 MD65 Communication Module Cover
• DN-2.5 DeviceNet Product Overview
• DN-6.7.2 DeviceNet Cable System Planning and
Installation Manual
• DN-6.5.16 DeviceNet Starter Kit
• 1756-5.66 ControlLogix DeviceNet Scanner
Installation Instructions
• 9399-WAB32GR Getting Results with RSLinx
Online help installed with the software
• 9399-RL53GR RSLogix 5 Getting Results Guide
Online help installed with the software
• 9399-RL50GR RSLogix 500 Getting Results Guide
Online help installed with the software
• 9399-RLD300GR RSLogix 5000 Getting Results Guide
Online help installed with the software
• 9399-DNETGR RSNetWorx for DeviceNet Getting Results
Guide
Online help installed with the software
• 1747-5.8 DeviceNet Scanner Module Installation
Instructions