Manual

DeviceNet Module Parameters B-1
APPENDIX B
DeviceNet Module
Parameters
The following information is provided for each DeviceNet module
parameter along with its description:
About Parameter numbers
The parameters in the module are numbered consecutively.
However, depending on which configuration tool you use, they have
different numbers.
Parameter Number: Unique number assigned to each
parameter.
Parameter Name: Unique name assigned to each
parameter.
Range: Predefined parameter limits or
selections.
Default: Factory default setting.
Type: Read Only or Read/Write.
Reset Required: Module must be reset before parameter
value is recognized.
Configuration Tool Numbering Scheme
• VS Utilities
•OIM
The module parameters begin with
parameter 1. For example, parameter 01
(Mode) is parameter 1 as indicated by
this manual.
• Explicit Messaging
• RSNetWorx for
DeviceNet
The module parameters are appended to
the list of drive parameters. For example,
with a drive with 300 parameters,
parameter 01 (Mode) is parameter 301.