User manual

6-14 Using Explicit Messaging
Response Data for Write to Drive Parameter 101
Program
Important: To originate a scanner transaction, use a copy operation to
M0:[slot number]:224. Then, use a copy operation to read
M1:1.224 for the result. If more than one message is
enabled, use the TXID to determine which message you are
reading.
Address Value (hex) Description Refer to . . .
N9:50 0101 TXID = 01, Status = 01 (successful transaction) 6-6
N9:51 0000 Port = 00, Size = 00 bytes 6-6
N9:52 9001 Service = 90 (successful)
Address = 01 (Node Address)
6-6