User manual

1-6 Getting Started
The adapter uses three status indicators to report its operating status.
They can be viewed through the drive cover. See Figure 1.2
.
Figure 1.2 Status Indicators (location on drive may vary)
Modes of Operation
Item Status
Indicator
Status
(1)
(1)
If all status indicators are off, the adapter is not receiving power. Refer to Chapter 2,
Installing the Adapter
, for instructions on installing the adapter. If any other conditions
occur, refer to Chapter
8, Troubleshooting.
Description
➊
PORT Green Normal Operation. The adapter is properly connected and
is communicating with the drive.
Flashing
Green
The adapter is in the process of establishing a connection
to the drive. This status indicator will turn solid green or
red.
➋
MOD Green Normal Operation. The adapter is operational and is
transferring I/O data.
Flashing
Green
Normal Operation. The adapter is operational but is not
transferring I/O data.
➌
NET A Green Normal Operation. The adapter is properly connected and
communicating on the network.
Flashing
Green
The adapter is properly connected but is not
communicating with any devices on the network.
➍
NET B Off Not used for DeviceNet.
➊
➋
➌
➍
➊
➋
➌