User manual

Index-5
R
reference/feedback
definition, G-7
in I/O image, 5-2, 7-4
using, 5-3
Register object, C-6
regulatory compliance, A-1
related documentation, P-1
Reset Module parameter, B-2
ribbon cable, refer to Internal
Interface cable
RSLinx, P-2, 3-3
RSNetWorx for DeviceNet
creating EDS files with, 3-5
definition, G-7
editing parameters with, 3-6
going online, 3-4
saving a network configuration,
4-7
setting up RSLinx for, 3-3
using to map I/O, 4-5
using to set up a scan list, 4-2
web site, G-7
S
safety precautions, 1-4
scan list, 4-2
scanner
adding devices to a scan list, 4-2
configuring for COS, Cyclic, or
Polled, 4-4
definition, G-7
mapping I/O, 4-5
Single mode
setting with the jumper, 2-3
versus Multi-Drive mode, 7-1
SLC
example program for Explicit
Messages, 6-13
example program for I/O, 5-9
formatting Explicit Messages, 6-4
specifications
adapter, A-1
DeviceNet, G-3
status indicators
definition, G-7
identifying, 1-6
locating, 8-1
switches
locating, 1-1
setting, 2-2
T
technical support, P-2
tools required, 1-3
troubleshooting, 8-1
U
UCMM, G-8
update, see flash update
W
web site
for EDS files, G-4
for manuals, P-1
wiring, refer to cables
Z
zero data
configuring an adapter for, 3-10
definition, G-8