User manual

Chapter 1
Getting Started
The 22-COMM-D DeviceNet adapter is a communication option
intended for installation into a PowerFlex 40 drive. It can also be used
with other Allen-Bradley products that support an internal DSI adapter.
The Multi-Drive feature (Chapter
7) also provides a means for
PowerFlex 4 drives and other DSI Hosts to connect to DeviceNet.
Figure 1.1 Components of the Adapter
Topic Page Topic Page
Components 1-1 Safety Precautions 1-4
Features 1-2 Quick Start 1-5
Compatible Products 1-3 Modes of Operation 1-6
Required Equipment 1-3
Components
Item Part Description
➊
Status
Indicators
Three LEDs that indicate the status of the connected drive,
adapter, and network. Refer to Chapter 8, Troubleshooting.
➋
DSI Connector A 20-pin, single-row shrouded male header. An Internal
Interface cable is connected to this connector and a connector
on the drive.
➌
DeviceNet
Connector
A 5-pin connector to which a 5-pin linear plug can be connected.
➍
Node Address/
Rate Switches
Switches for setting the node address and network data rate.
Refer to Chapter 2
, Installing the Adapter.
➎
Mode Jumper
(J2)
Selects Single or Multi-Drive mode of operation. Refer to
Chapter 2
, Installing the Adapter.
➊
➋
➌
➍
➎