Specifications

Publication 1771-IN014B-EN-P - September 2001

14 DeviceNet Scanner Module Catalog Number 1771-SDN/C

3. Insert the 1771-SDN Scanner Module into the slot you have

selected.

4. Apply firm, even pressure to seat the module in the I/O chassis

backplane connectors.

5. Swing the locking bar down until locked in place to make sure

that you have secured the module in the slot.

Connect to the DeviceNet

Network

To connect to the DeviceNet network:

Locking Bar

20278

Locking Bar

20279

WARNING

If you insert or remove the scanner module with

power applied to this module or any device on the

network, an electrical arc can occur. This could

cause an explosion in hazardous location

installations. Be sure that power is removed or the

area is nonhazardous before proceeding.