User manual

1-4 Overview
SCANport Products Some SCANport products support one peripheral; others support up
to six peripherals. The table below lists SCANport products, the
number of peripherals each supports, the minimum and maximum I/O
words, and the type of adapter that can be used.
Important: To connect multiple peripherals to a SCANport product,
a port expander may be required. Refer to your product’s
documentation for more information.
Important: If you intend to use datalinks to communicate with and
control your SCANport product, verify that your SCANport product
supports datalinks before enabling them in the adapter.
Product
Number of
Peripherals
Supported
I/O Words Adapter Use
Minimum Maximum 1203-GU6 1336-GM6
1305 AC MICRO Drive
➃
5 0 10 Yes No
1336 IMPACT™ Drive
6
➀
010Yes
Ye s
➁
1336 PLUS AC Drive
6
➀
010Yes
Ye s
➁
1336 PLUS II Drive
6
➀
0 10 Yes Yes
1336 FORCE™ Drive
6
➀
010Yes
Ye s
➁➂
1394 AC Mult-Axis Motion Control
System
5 0 10 Yes No
SMC Dialog Plus 1 0 2 Yes No
SMP-3 Smart Motor Protector 2 0 2 Yes No
1397 Digital DC Drive 5 0 10 Yes No
1557 Medium Voltage Drive 5 0 10 Yes No
➀ Lower horsepower products may not support a sixth peripheral. Refer to your user manual to verify that your product
supports a sixth peripheral.
➁ B frame or larger is required.
➂ A standard adapter board is required.
➃ Early versions of the 1305 drive may not support some communications.