User manual

P-2 Using this Manual
Contents of this Manual
This manual contains the following information:
Related Publications
Chapter Title Contents
Preface
Using this Manual Describes the purpose, background, and scope of this manual. Also provides information on
safety precautions and technical support.
1
Overview Provides an overview of the communications adapter, DeviceNet, and SCANport.
2
Installation Provides procedures for installing the 1203-GU6 module or 1336-GM6 board.
3
Configuring the 1203-GU6
Enhanced DeviceNet Module Using
a Serial Connection
Provides procedures for configuring the 1203-GU6 using a serial connection. Topics include
how to set up a serial connection to the 1203-GU6, how to navigate the module’s software, edit
parameters, perform a flash upgrade to its firmware, and view its event queue.
4
Configuring the Enhanced
DeviceNet Adapter Using
RSNetWorx for DeviceNet
Provides procedures for configuring the 1203-GU6 module or 1336-GM6 board over DeviceNet
using RSNetWorx for DeviceNet.
5
Configuring a Scanner to
Communicate with the Adapter
Provides procedures for using RSNetWorx for DeviceNet to configure scanners to
communicate with devices such as the 1203-GU6 module and 1336-GM6 board.
6
Ladder Logic Programming Provides an example ladder logic program for a PLC and an example ladder logic program for
an SLC.
7
Using DeviceNet Explicit
Messaging
Provides information about explicit messaging, including messaging with PLCs, messaging with
SLCs, and using messages to control the SCANport product.
8
Troubleshooting Provides information on the various states of the adapter’s LEDs, including Network Status,
Module Status, and SCANport Status.
A
Specifications Provides the specifications for the 1203-GU6 module and 1336-GM6 board.
B
Enhanced DeviceNet Adapter’s
Parameters
Provides information on the adapter’s parameters and how to use them to configure the
adapter.
C
DeviceNet Objects Defines the DeviceNet object classes, class services, and attributes that are supported by the
Enhanced DeviceNet adapter.
D
Supported PCCC Messages Provides a reference list of PCCC messages supported by the Enhanced DeviceNet adapter.
E
N-File Addresses Lists the N-files to which messages can be written.
F
Supported Emulated Block Transfer
Commands
Provides a reference list of emulated block transfer commands.
G
Event Queue Messages Provides a list of messages you may see in the event queue.
Title Publication Number
RSNetWorx for DeviceNet Getting Results Manual 9398-DNETGR
1771-SDN Scanner Configuration Manual 1771-6.5.118
1747-SDN DeviceNet Scanner Configuration Manual 1747-6.5.2
DeviceNet Cable System Planning and Installation Manual DN-6.7.2