User Guide 1/4 - 2 HP, 115/230 VAC

25Operation
1. Press the forward pushbutton for
forward motor rotation.
2. Motor rotates in the forward
direction until the forward limit
switch opens.
3. The motor stops and dwells when the
forward limit switch opens. Set the
dwell time by calibrating the DWELL
TIME trimpot (see page 23).
4. Motor rotates in the reverse
direction until the reverse limit
switch opens.
5. The motor stops when the reverse
limit switch opens. Return to step 1
to repeat the process.
Press FWD to go forward.
Reverse
Limit
Switch
Forward
Limit
Switch
Forward Direction
Reverse Direction
STOP
AND
DWELL
STOP
Mode 2 – Single cycle between forward and reverse
limit switches
• Single cycle automatically returns travel to the reverse
limit switch location.
250-0285-rev1.qxd 4/26/00 9:36 AM Page 25