230 VAC User Manual

Application Notes

In the second wiring option, connect the RUN/JOG switch and the JOG pushbutton

as shown in Figure 21. When the RUN/JOG switch is set to JOG, the motor

decelerates to minimum speed (minimum speed is determined by the MIN SPD

trimpot setting). Press the JOG pushbutton to jog the motor. Return the RUN/JOG

switch to RUN for normal operation.

Figure 20. RUN/JOG Switch Connection to

Inhibit Plug

Figure 21. RUN/JOG Switch Connection to

Speed Adjust Potentiometer