Installation Owner's manual

Rockwell Automation Publication CHPS-UM001D-EN-P - July 2014 23
Planning the Stage Installation Chapter 3
Clearance Requirements
The figures depict the minimum clearances for each stage type.
Power and feedback cables can impose additional clearance requirements. Refer
to Interconnect Cables
on page 85 for connector and bend radius requirements.
Figure 3 - Minimum Clearance Requirements
Covered Stage: 419 mm (16.5 in.)
Clearance on Both Ends for Lubrication Access
Uncovered Stage: 3.2 mm (0.125 in.)
Clearance All Around
Cabling: 19 mm (0.75 in.) Clearance for Cable Routing