Specifications

31
Verify the new parameters are correct. If a parameter is incorrect then make the necessary
changes.
6) If the “EDS Editor” menu is not
prompted then click on the
“Upload” icon to upload the
latest parameters to the CDN366.
7) Click on “All Parameters” and
select “Rx Inst 1”.
8) Click on “(Rx Inst-1) Data
Size” and enter 15.
9) Since the example is short-string
data type. Click on “(Rx Inst-1)
Data Type” and enter 218.
10) Click on “(Rx Inst-1) Data in
Poll Command” and set “Data
in Poll”.
11) Disable “Rx Inst-2 to Rx Inst-
8” serial receive by setting “Data
not in Poll”.
12) Click on “Rx Inst 1” in Groups:
and select “Tx Inst 1”.
13) Click on “(Tx Inst-1) Data Size”
and enter 2.
14) Since this example uses the short-
string data type. Click on “(Tx
Inst-1) Data Type” and enter
218.
15) Click on “(Tx Inst-1) Data in
Poll Command” and set “In Poll
Command”.
16) Disable “Tx Inst-2 to Tx Inst-8”
serial transmit by setting “Data
not in Poll Command”.
Click“OK”.
17) The “EDS Editor” menu is
prompted, click on “Yes” to
download new parameter settings
to CDN366.