Manual

2-4 Introduction
Publication 999-122 - January 1997
•
AxisLink option allows real-time axis coordination between
controllers for distributed, multi-axis systems.
•
Non-volatile storage (write-locked battery-backed RAM) of
application program, setup parameter and default variable values.
•
Memory Lock keyswitch on front panel prevents accidental or
unauthorized changes to application program, default setup
parameters, and default variable values.
Model Numbering System
The IMC-S/23x is available as a two- or four-axis motion controller
with optional Remote I/O Adapter and AxisLink. The complete model
number is specified as shown below:
Pre-Engineered Cable
Assemblies
Pre-engineered cable assemblies are used for connecting the Flex I/O,
servo amplifiers, feedback devices, axis-specific (dedicated) I/O, and
the CPU watchdog. The table below shows the available cable
assemblies.
IMC-S/
2
3
Platform
2 = Stand Alone
-
Packaging
3 = Compact Package
Number of Axes
2 =Two Axes
4 = Four Axes
Remote I/O Option
R = Remote I/O Adapter
AxisLink Option
L = AxisLink Multi-Axis Synchronization Link
!
ATTENTION:
Do not attempt to make any electrical
connections to the IMC-S/23x while the power is on!
Doing so risks damage to the IMC-S/23x, external
components, and your health!