Manual

6-4 Setting Up Your IMC-S/23x Using GML
Publication 999-122 - January 1997
Defining Your Controller and Its Options
To define your controller and the options that you will use with it:
1.
Select
Definitions
from the menu bar. The Definitions menu
appears.
2.
Select
Control Options
. The IMC S/200 Options window appears.
3.
In the
Control type
area, select
IMCS (2 or 4 axes)
. A dot appears
in the radio button in front of the text.
4.
In the
iCODE Version
box, select the iCODE firmware version and
hardware configuration of your control.
Note:
You can find the ICODE firmware version using
the Online Manager. Refer to
Establishing
Communication
for more information.
5.
Select any options (e.g., RIO, AxisLink, DH-485) that you will use.
6.
Select
Axis/Drive Data Downloads
. An X appears in the box in
front of the text. This allows the Axis Use setups to be downloaded
with the diagram.
7.
Click on
Save
. The information is saved and the Diagram window
appears.
8.
Select
File
from the menu bar. The
File
menu appears.
9.
Select
Save As
. The GML:Save As windowSave As windowSave
As window appears.
10.
Type the name that you want to assign to this file and click on
OK
.
The Diagram window appears with name you just assigned to this
file as the title.