Manual

Setting Up Your IMC-S/23x Using GML 6-3
Publication 999-122 - January 1997
Getting Started
You will use GML to start the Compact. Refer to the
GML
Programming Manual
(Publication 999-104) for more detailed
information on using GML.
To start GML for your system:
1.
Connect the serial cable from the programming terminal to serial
port A on the controller.
2.
Start GML for Windows.
3.
At the New Diagram window, select
File
from the menu bar. The
File menu appears.
4.
Select
Close
. The New Diagram window closes and the GML
window appears.
Defining Preferences
To define preferences for your system:
1.
Select
File
from the menu bar. The File menu appears.
2.
Select
Preferences
. The Preferences window appears.
3.
In the
Control Family
area, select
IMC S Control Family
.
4.
In the
Serial Interface
area, set the correct baud rate and port.
Note:
GML and the IMC S Class have a default baud rate
of 9600.
5.
Review the other preferences and make changes, as needed, for the
configuration you want.
6.
7.
Select
File
from the menu bar. The File menu appears.
8.
Select
New Diagram
. a new diagram window appears.
To save these
preferences for:
Do this:
This and future
sessions of GML
Click on
Save
.
This session of GML
only
Click on
OK
.