User Manual

Installation/Update Procedure
1-3
3. Select the INSTALL option. This option moves the Rockwell Software product
and activation files from floppy disks to your computer's hard drive.
• Type I.
• When prompted to confirm, type: Y [Enter] to install the A.I. Series software
and display the following screen. Otherwise, type: N [Enter] to return to the
beginning of this step.
The system displays the following screen, listing the available software modules.
Note The Emulation module is an added-cost option. Do not attempt to install Emulation
unless you have an Emulation Master disk.
4. Type Y in the field to the right of each module you want to install. When you
reach the bottom of the screen, type Y and press [Enter]. A screen like the
following will appear.