User Manual

Copy Protection
2-21
DOS Reset Command Syntax
The DOS version of RESET has the following syntax.
RESET
RESET /?
RESET DRIVE RESETCODE
RESET DRIVE [/V] [/D]
RESET /F [/V] [/D]
where
/? displays help text for Reset; the slash is optional.
DRIVE Drive letter with the software to be reset
RESETCODE Reset code issued by the Rockwell Software technician
/V View products on the drive
/D Detail current network usage counts
/F Find drives containing activation
Windows Reset Utility
To use the Windows version of the reset utility:
1. Insert your Master disk from the Rockwell Software product that needs to be reset
in the floppy disk drive. We will assume this is drive A for our example.
If you have the Reset icon in Windows, you can simply double click the icon and
go to step 3.
2. Run Reset either with a run command in Windows or in a DOS box under
Windows 95 or Windows NT.
• Select Run from the file menu (or Start menu in Windows 95) and type:
A: RESET. Click OK.
• In Windows 95 or Windows NT, open a DOS box. Type:
A: RESET[Enter].